| Information about a customer. |
| Organization:* |
|
| Department: |
|
| Full postal address: |
|
| Telephone number:* |
|
| Contact person:* |
|
| E-mail: |
|
| Equipment data. |
| Manufacturer: |
|
| Equipment: |
|
| Production, technological process: |
|
| Pump description: |
|
| Shaft diameter (without a bushing) in a point of seal
installation: |
|
| Shaft speed, RPM: |
|
| Maximal axial shaft runout/displacement, mm: |
|
| Maximal shaft radial runout, mm: |
|
| Oil and benzine resistance of rubber in the pumping medium: |
|
| Sealing liquids, compatible with the pumping medium: |
|
| Allowable leakage of the sealing liquid into the pumping
medium and atmosphere, l/hour: |
|
| Preferable constructive material: |
|
 |
| Characteristics of the pumping
medium. |
| Description: |
|
| Maximal absolute pressure before the seal, MPa: |
|
| Maximal temperature around the seal, В°C: |
|
| Boiling temperature at working pressure, В°C: |
|
| Viscosity of the pumping medium, cm2/sec: |
|
| PH rate (for water solutions): |
|
| Volume concentration of solid particles: |
|
| Dimensions of solid particles, Вµm: |
|
| Special characteristics of the pumping liquid: toxicity,
explosibility, flammability, radioactivity: |
|
| Other characteristics of the pumping medium: |
|
| Design features. |
| Diameter of the gland box, Dk, mm: |
|
| Depth of the gland box, L1, mm: |
|
| Maximal diameter of the flange, Dфл, mm: |
|
| Maximal size of the assembly area, Lmax, mm: |
|
| Circle diameter of the bolt-holes, Dотв, mm: |
|
| Diameter of the fasteners-holes, D, mm: |
|
| Quantity of the fasteners-holes, pcs.: |
|
| Canting angle, degree: |
|
| Other design features: |
|
|
